Third Party Testing

THIRD-PARTY TESTING SERVICE

Net Business Hub (NBH) provides independent 3rd party impartial testing services. Our product testing service gives your company a better acceptance from consultants, authorities, contractors and builders. You are free to choose the third-party testing agency, connected with us, at an affordable cost. Our services are better than any agency could give you directly and covers end -to-end test, third party witnessing and approval from authorities. As a vendor or manufacturer, all your testing and third-party inspections are covered under our services.

We conduct tests based on the applicable national and international standards. Our engineers and technicians use calibrated test equipment and follow strict quality control procedures to make sure that the test results are accurate and reliable.

We also provide pre-shipment inspection services to ensure that the products shipped comply with the specifications and regulations of the destination country. We have a qualified team of inspectors who can visit the factory to inspect the products before shipment. We also provide factory audit services to ensure that the products manufactured are of a good quality and comply with the applicable standards and regulations.

Our certification services include product certification, factory inspection, and factory audit. We also provide quality management systems certification for the telecommunication and/or IOT industry covering all standards. Our services are customized to meet the specific requirements of our clients. Our quality assurance staff is experienced and knowledgeable and ensures that the products manufactured meet the highest standards of quality.

Test Standards

List of telecommunications and IOT quality standards used for product testing

  1. International Telecommunication Union (ITU) Quality Standards
  2. Global System for Mobile Communications (GSM) Quality Standards
  3. International Mobile Telecommunications (IMT) Quality Standards
  4. 3GPP Quality Standards
  5. 4G Long-Term Evolution (LTE) Quality Standards
  6. 5G New Radio (NR) Quality Standards
  7. IEEE 802.11 Wireless Quality Standards
  8. Bluetooth Quality Standards
  9. Wi-Fi Quality Standards
  10. Zigbee Quality Standards
  11. NFC Quality Standards
  12. RFID Quality Standards
  13. Narrowband-Internet of Things (NB-IoT) Quality Standards
  14. LTE-Advanced Pro Quality Standards
  15. Open Mobile Alliance (OMA) Quality Standards

List of data network quality standards

  1. IEEE 802.3 Ethernet Quality Standards
  2. IEEE 802.11 Wi-Fi Quality Standards
  3. IEEE 802.15 Bluetooth Quality Standards
  4. IEEE 802.16 WiMAX Quality Standards
  5. IEEE 802.20 Mobile Broadband Wireless Access (MBWA) Quality Standards
  6. Cellular Digital Packet Data (CDPD) Quality Standards
  7. Asynchronous Transfer Mode (ATM) Quality Standards
  8. Broadband Integrated Services Digital Network (B-ISDN) Quality Standards
  9. Synchronous Optical Network (SONET) Quality Standards
  10. Synchronous Digital Hierarchy (SDH) Quality Standards
  11. Multi-Protocol Label Switching (MPLS) Quality Standards
  12. Internet Protocol (IP) Quality Standards
  13. Open Systems Interconnection (OSI) Quality Standards
  14. Asynchronous Transfer Mode over Ethernet (ATMoE) Quality Standards
  15. Carrier Ethernet Quality Standards

List IEC standards for communication products

  1. IEC 62368-1: Audio/Video, Information and Communication Technology Equipment – Safety Requirements
  2. IEC 60950-1: Information Technology Equipment – Safety Part 1: General Requirements
  3. IEC 61131-2: Programmable Controllers – Part 2: Equipment Requirements and Tests
  4. IEC 61850-3: Communication Networks and Systems in Substations – Part 3: Generic Object-Oriented Substation Events (GOOSE)
  5. IEC 60068-2-x: Environmental Testing – Part 2: Tests
  6. IEC 61000-4-x: Electromagnetic Compatibility (EMC) – Part 4: Testing and Measurement Techniques
  7. IEC 62439-2: High Availability Seamless Redundancy (HSR)
  8. IEC 61375-2-x: Train Communication Network (TCN) – Part 2: Conformance Tests
  9. IEC 62443-x-y: Industrial Network Security – Part x: Network Security Guidance, Part y: System Security Requirements
  10. IEC 62236-x: Power Line Communications (PLC) – Part x: Technical Requirements and Tests

List telecordia standards

  1. GR-63-CORE: Generic Requirements for Network Equipment
  2. GR-2887-CORE: Generic Requirements for Network Element Security
  3. GR-499-Core: Telecommunications Infrastructure Reliability
  4. GR-909-CORE: Generic Requirements for Central Office Equipment, Connectors and Cables
  5. GR-1409-CORE: Generic Requirements for Outside Plant (OSP) Cable
  6. GR-1209-CORE: Generic Requirements for Subscriber Line Interface Circuit (SLIC) Equipment
  7. SR-332-CORE: Synchronization Requirements for Telecommunications Systems
  8. SR-1465-CORE: Telecommunications Network Management
  9. SR-332-CORE: Synchronization Requirements for Telecommunications Systems
  10. SR-1477-CORE: Telecommunications Network Security
  11. SR-2830-CORE: Telecommunications Network Quality of Service (QoS) Requirements

List IEC standards for Fiber Optic cables

  1. IEC 61280-4-1: Fibre Optic Interconnecting Devices and Passive Components - Part 4-1: Connectors
  2. IEC 60793-2-10: Optical Fibres - Part 2-10: Measurement Methods and Test Procedures - Fibre Optic Cable Assemblies
  3. IEC 60794-1-2: Optical Fibres - Part 1-2: General - Fibre Optic Cables
  4. IEC 60794-3-1: Optical Fibres - Part 3-1: Indoor Cables
  5. IEC 60794-3-2: Optical Fibres - Part 3-2: Outdoor Cables
  6. IEC 60794-4: Optical Fibres - Part 4: Cable Assemblies
  7. IEC 60794-5: Optical Fibres - Part 5: Connectors
  8. IEC 60794-6: Optical Fibres - Part 6: Fibre Optic Connector Interfaces
  9. IEC 60794-7: Optical Fibres - Part 7: Cables and Connectors for Outdoor Use
  10. IEC 60794-8: Optical Fibres - Part 8: Cables for Indoor Use

List IEC standards for cat6 cables

  1. IEC 61156-5: Twisted Pair Cables and Connectors for Digital Communications - Part 5: Category 6
  2. IEC 60603-7-51: Generic Cabling Systems - Part 7-51: Category 6 UTP/STP
  3. IEC 61156-10: Twisted Pair Cables and Connectors for Digital Communications - Part 10: Category 6A
  4. IEC 61156-11: Twisted Pair Cables and Connectors for Digital Communications - Part 11: Category 7
  5. IEC 61156-12: Twisted Pair Cables and Connectors for Digital Communications - Part 12: Category 7A
  6. IEC 61156-13: Twisted Pair Cables and Connectors for Digital Communications - Part 13: Category 8

List IEC standards for channel Test

  1. IEC 61280-4-2: Fibre Optic Interconnecting Devices and Passive Components - Part 4-2: Channel Test Methods
  2. IEC 61280-4-3: Fibre Optic Interconnecting Devices and Passive Components - Part 4-3: Channel Test Procedures
  3. IEC 61280-4-4: Fibre Optic Interconnecting Devices and Passive Components - Part 4-4: Channel Test Performance Requirements
  4. IEC 61280-4-5: Fibre Optic Interconnecting Devices and Passive Components - Part 4-5: Channel Loss Measurement
  5. IEC 61280-4-6: Fibre Optic Interconnecting Devices and Passive Components - Part 4-6: Return Loss Measurement
  6. IEC 61280-4-7: Fibre Optic Interconnecting Devices and Passive Components - Part 4-7: Attenuation Measurement
  7. IEC 61280-4-8: Fibre Optic Interconnecting Devices and Passive Components - Part 4-8: Insertion Loss Measurement
  8. IEC 61280-4-9: Fibre Optic Interconnecting Devices and Passive Components - Part 4-9: Polarisation Mode Dispersion Measurement

List IEC standards for Class EA channel

  1. IEC 61280-4-10: Fibre Optic Interconnecting Devices and Passive Components - Part 4-10: Class EA Channel
  2. IEC 61280-4-11: Fibre Optic Interconnecting Devices and Passive Components - Part 4-11: Class EA Channel Performance Requirements
  3. IEC 61280-4-12: Fibre Optic Interconnecting Devices and Passive Components - Part 4-12: Class EA Channel Test Procedures
  4. IEC 61280-4-13: Fibre Optic Interconnecting Devices and Passive Components - Part 4-13: Class EA Channel Test Methods
  5. IEC 61280-4-14: Fibre Optic Interconnecting Devices and Passive Components - Part 4-14: Class EA Channel Loss and Return Loss Measurement

List ISO/IEC 11801 standards

  1. ISO/IEC 11801-1: Generic Cabling for Customer Premises - Part 1: General Requirements
  2. ISO/IEC 11801-2: Generic Cabling for Customer Premises - Part 2: Balanced Twisted-Pair Cabling
  3. ISO/IEC 11801-3: Generic Cabling for Customer Premises - Part 3: Optical Fibre Cabling
  4. ISO/IEC 11801-4: Generic Cabling for Customer Premises - Part 4: Wireless Cabling
  5. ISO/IEC 11801-5: Generic Cabling for Customer Premises - Part 5: Field Testing and Measurement Requirements
  6. ISO/IEC 11801-6: Generic Cabling for Customer Premises - Part 6: Requirements for Connecting Hardware and Patch Cords
  7. ISO/IEC 11801-7: Generic Cabling for Customer Premises - Part 7: Administration Requirements

List ISO/IEC 11801 for class EA channel standards

  1. ISO/IEC 11801-8: Generic Cabling for Customer Premises - Part 8: Class EA Channel
  2. ISO/IEC 11801-9: Generic Cabling for Customer Premises - Part 9: Class EA Channel Test Requirements
  3. ISO/IEC 11801-10: Generic Cabling for Customer Premises - Part 10: Class EA Channel Performance Requirements
  4. ISO/IEC 11801-11: Generic Cabling for Customer Premises - Part 11: Class EA Channel Test Procedures
  5. ISO/IEC 11801-12: Generic Cabling for Customer Premises - Part 12: Class EA Channel Loss and Return Loss Measurement

List ISO/IEC 11801-1 for channel transmission

  1. ISO/IEC 11801-13: Generic Cabling for Customer Premises - Part 13: Channel Transmission
  2. ISO/IEC 11801-14: Generic Cabling for Customer Premises - Part 14: Channel Transmission Test Requirements
  3. ISO/IEC 11801-15: Generic Cabling for Customer Premises - Part 15: Channel Transmission Performance Requirements
  4. ISO/IEC 11801-16: Generic Cabling for Customer Premises - Part 16: Channel Transmission Test Procedures
  5. ISO/IEC 11801-17: Generic Cabling for Customer Premises - Part 17: Channel Transmission Loss and Return Loss Measurement
© 2024